Autel TBE200(E) Digital Tire Tread Depth Gauge

Unlock the Future of Tire Inspection with Laser Precision

The Autel MaxiTPMS TBE200E is a laser-enabled tire tread depth and brake disc wear examiner that provides users with quick and accurate wear measurements. Unlike traditional tools, the TBE200E uses advanced laser technology to measure tread depth and brake disc wear without having to remove the tire, saving you time and boosting your service efficiency.

Autel TBE200(E) Tire Tread Depth Gauge & Brake Disc Wear scan Tool Key Features:

⚡ Laser Measurement Technology: No physical probe needed. Experience 0.1mm accuracy for both tread depth and brake disc wear checks.
🚗 2-in-1 Brake & Tire Tester: Measure brake disc wear without removing the wheel—a massive time-saver for busy workshops.
📸 Dual Cameras: Equipped with a 4MP macro camera and an 8MP wide-angle camera to document tire damage and uneven wear patterns visually.
🔍 Real-Time Tire Health Analysis: Instantly view measurement data on the 1.65" AMOLED touchscreen. The tool displays measurement curves to reveal uneven wear (alignment issues).
📊 Comprehensive Reports: Generates professional QR code reports. Scan the Tire DOT number to check for tire expiration and recall notices instantly.
🔗 Seamless Integration: Works as a standalone device or pairs with the Autel ITS600E for complete TPMS and tire service functions.

Autel TBE200(E) Tire Tread Depth Gauge & Brake Disc Wear scan functions Meet Car Repair Shop Mechanic & DIYer's Needs

1. Tire Tread Depth:
Using laser technology, the Tire Tread application analyzes the wear of the tires on vehicles with no need to remove the tires. Place the tool on the tire, and the tool projects a laser beam. The wear measurement is then sent to the display screen with an accuracy within 0.1mm. Measurements are also displayed graphically. The Tire Tread application provides two types of checks: “All Treads” and “Single.” When using this application, a message will display prompting user to choose between the current mode the alternative one.

2. Brake Disc Check:
This function allows the Brake rotor surface wear to be measured independent of the tire tread depth measuring functions. In the order displayed on the tool. Place the tool's magnetic tip on the rotor 90 degrees so the laser will span from the hub and the edge of the disc. Swiping left will display the information for each brake rotor. 0.1 refers to the amount of surface wear on the brake rotor. 1/10TH of a millimeter. The typical threshold for replacement is 1.0 mm of material worn off the surface. These rotors are in great condition.

Autel TBE200(E) Tire Tread Depth Gauge & Brake Disc Wear Gauge Functions:

1. Laser Measurement – Make Sure Quick and Accurate Tests
With laser technology, the tire tread application analyzes the wear of the tires on vehicles with no need to remove the tires. Place the tool on the tire, it will project a laser beam, and display real-time data.

1) Improve Convenience:
Unlike other tire & disc examiners, which need to dismantle the tire before the test, or use the tool to test over different parts of the tire several times to get a result, the laser measurement technology enables the TPMS tool TBE200E to test the tire and disc without removing the tires and do uneven analyses.

2) Increase Accuracy:
The wear measurement tool Autel MaxiTPMS TBE200E will measure the tire depth and disc and then send the results to the display screen with an accuracy within 0.1mm, providing technicians or DIYers with the maximum precise test results. Measurements are also displayed graphically for a quick and clear results analysis.

3) Raise Efficiency:
Your MaxiTPMS TBE200E laser-enabled tool examines brake disc wear and tire depth both quickly and accurately. Once the laser beam is shot out, the TPMS tool will measure the tire status immediately and show the real-time data to the screen.

2. Tire Status Analysis– Get Comprehensive Tire Depth & Disc Measurement Results

1) Real-Time Measurement Data Display:
Technicians or DIYers just need to place the tool on the tire surface, and disc surface, pressing the Power/ Measure button to take measurements for each tire and the real-time measurement data will appear on the screen with wear status illustrated in different colors.

2) Uneven Wear Analysis:
Autel MaxiTPMS TBE200E can measure each tire wear status, which helps users process the uneven wear analysis and detect the issues such as abnormal tire pressure, tire dynamic balance issues, four-wheel alignment issues, or suspension problems in time.

3) Single or All Tire Tread/ Brake disc:
There are two check modes available under the tire tread application: Single Check helps measure the wear of each tire on the vehicle by examining the tread depth in the center area of the tire only. All Tread Check: The All Tread checks your tire wears in three separate areas (outer, center, and inner) for a more comprehensive analysis.

4) Replacement & Maintenance Suggestions:
The TPMS tool TBE200E provides mechanics or DIYers tire replacement or maintenance suggestions in detail after finishing the measurement to save your time for troubleshooting and help the tires on the vehicles perform at their optimum level.


3. Extended Tire Services - Ease Your TPMS Repair Work

1) DOT Scan:
Mechanics can use the TPMS tool TBE200E to scan or manually enter the tire DOT serial number located on the sidewall to read the information such as the tire's origin information and factory code, the last four digits are the tire's production date, and acquire basic tire characteristics such as tire recall (American region only) and tire age.

2) Tire Expiration Notice, and Tire Recall Lookup:
The tire could be expired for a long time of no use, use the scan function, and technicians can get the tire expiration notice to get such information. TBE200E will also display tire recall lookup launched by the manufactures to avoid safety issues.

3) Take Photos of Tire Wear & Damage:
The TPMS tool TBE200E's dual cameras (CMOS WXGA, 1 megapixel & 8 megapixels, 30fps) not only enable users to scan Tire Identification Number (TIN) but also document tire wear and damage for better analysis of the tire issue.

How to Use Autel MaxiTPMS TBE200 Tire Tread Depth Gauge?

Step 1: Long press the power button to turn on the tool.
Step 2: Perform Tire Tread Check: On the Main Job screen, tap the Tread Check icon, and place the tool on the tire surface. Short press the power button. Ensure the laser line is perpendicular to the channels of the tire. The screen will display real-time measurement data, slide left to view details.
Step 3: Possible Results for Measurements: Wear status is represented by icon color: A gray icon indicates the tire is untested; green indicates the tire is in good condition; yellow indicates a replacement is recommended; red indicates immediate replacement is recommended.
Step 4: Calibration: On the Main Job screen, tap the Calibration icon, and place the magnetic head on the calibration table. Press the power button to start. Wait for 1-2 minutes until calibration is complete.
Calibration Frequency: Calibration is recommended every two months. Immediate calibration should be performed if deviations are detected or if the tool is dropped or in some manner mishandled.

Autel TBE200(E) Specifications:

Autel MaxiTPMS TBE200(E) Packing List:

1x MaxiTPMS TBE200E Main Unit
1x Calibration Table
1x Power Adapter
1x Type C USB Cable
1x Quick Reference Guide
1x Packing List
1x Carrying Case